The enve road disc brake fork with thru axle offers a lightweight, high-performance option for road riders seeking the ultimate wheel security.
As road cycling has evolved, enve has stayed ahead of the curve by creating a fork that fits the modern demand for disc brakes, high volume tyres and bigger clearances while maintaining the premium ride quality enve forks are known for.
The enve road disc brake fork features a modern 32mm of tyre clearance, a low axle to crown height of 370mm, internal hose routing and utilises enve's most advanced carbon manufacturing to ensure strength and low weight.
The fork uses an innovative manufacturing process where the carbon fibres run continuously from the top of the steerer to the bottom of the drop-outs. This moulded one-piece construction with no drilling makes for a lighter, stronger fork that's specifically developed to handle the demands of disc brakes, rough roads and large volume tyres.
This model incorporates 12x100mm thru-axle dropout, which allows for maximum stiffness to cope with the stresses of disc brakes and eliminate brake rub on hard, out of the saddle efforts.
This makes the enve road disc thru axle fork perfect for cyclists who demand the ultimate in low-weight, high-strength performance with the security of a 12mm thru-axle setup.
Key features:
- weighs just 425g
- 12x100mm thru-axle
- available in two rakes (43 or 50mm)
- one-piece moulded design from dropout to steerer tube
- flat-mount disc brake compatible with 140 and 160mm rotors
please note
this fork is suitable for disc brake setups and hubs compatible with a 12mm thru-axle only.
Enve road disc brake fork - thru axle |
| wheel size | 700c |
| weight | 425g |
| material | carbon fibre |
| steerer tube length | 350mm |
| rake | 43 or 50mm |
| axle to crown | 370mm |
| brake | disc (140 or 160mm rotors) |
| axle compatibility | 12mm thru-axle |
| max tyre clearence | 32mm |
| crown race diameter | 1 1/4" (1.25) tapered |
| torque spec: steerer tube | 5.5nm |
| torque spec: axle | 8nm |