Chris King Seatpost Collar in Jade

If you want to experience the pride of owning something from Chris King, these seatpost collars will tick that box, whether you're looking to complete a set and match your hubs, headset and bottom bracket or simply add a pop of colour and class to your bike.

They're beautifully machined and anodised, then finished with the ‘King’ wordmark and a little bee logo, etched on the barrel nut, for that extra bit of buzz.

Choose from 10 of Chris King's current colourways, as well as four size options.

Features:

• Aluminium collar with stainless steel bolt, washer, and barrel nut
• Available in four sizes: 30.0, 31.8, 34.9, 36.4
• Made in the USA
• Lifetime Warranty
• Installion:
  • Measure the seat tube of your frame to ensure proper fit before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example, a 30.0 Seatpost Collar should fit a seat tube outer diameter of 29.5mm up to 30.5mm).
  • These measurements refer to the outside diameter of the seat tube of your frame, NOT the seatpost dimension.
  • We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminium, steel, or titanium frames.
  • Maximum Torque is 6nm.
  • Clamp Height: 15.88mm and Clamp Height to Inner Lip: 14.35mm.
  • The bolt and barrel nut of each King Seatpost Collar come with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.